This state-of-the-art software program is also fully integrated with gINT, Winlog, LogPlot and GeoSystem's LD4 suite of products.

SPT is the most widely used in-situ geotechnical test in the world. Geotechnical engineers have always been looking for correlations of SPT with soil properties. The problem raises when we get used to using one formula for correlation and forget about it's limitations and validity of the resulted numbers. To have a comprehensive understanding of how to use these formulas we need to compare as many as possible correlations, remove those methods which are not applicable to our project (or soil type) and get an engineering average of the selected methods. We have developed NovoSPT to help you overcome this steps!

NovoSPT is designed for correlating Standard Penetration Test (SPT/ DCPT) blow counts (N₆₀) and estimation of more than 27 geotechnical engineering soil  properties based on more than 246 equations and formulas extracted from 60 geotechnical books and papers. The following features are part of the incorporated capabilities in NovoSPT program (download FREE trial version to explore more):

	Supporting both Metric & Imperial units systems
	Bearing Capacity Analysis tool (for footing width range and 5 equations)
	All SPT correction factors including rod length, energy, sampling method, borehole diameter, ground water, overburden, etc.

	Plotting the graph of N60 and N1(60) with depth
	Save and Load features. All your calculations can be saved into *.spt files and you can re-load your project later

Importing SPT/DCPT data from gINT, WinLog, LogPlot project files with full customized data structure (see our gINT partnership)

	Consistency classification for all soil types
	Liquefactions resistance ratio (CRR)
	Pile's unit end bearing and skin friction
	Shallow footing's bearing capacity and settlement
	Correlation to other soil properties including DR, F, ES, VS, Gmax, EPMT, Pl, BPT, fs, Qall, S, mV, Su, etc.

	Printing the report
	Plotting the scatter graph for each correlated parameter based on different methods
	Comparing all selected methods along the borehole depth
	Importing SPT data and soil layers data from text files (*.txt)
	Exporting all tables and graphs to MS Excel and image formats
	Standard user manual (Help) with descriptive instructions on how to use the software.

If you use Wildcat Dynamic Penetrometer for your field investigation, you recommend you using NovoSPT for processing its data!   see the screen here

Choose appropriate item from the left menu to get detailed information about this unique software. Click on the following video and watch NovoSPT in action:

All charts can be separately printed, saved as text file, MS Excel file and even exported to graphic formats like JPG, BMP, TIFF, etc. Since bearing capacity and settlement of shallow foundation and piles are also incorporated into this program, user may enter as many SPT numbers in depth as necessary. NovoSPT will calculate the average N₆₀ below the foundation according to this data.

Screenshot for bearing capacity analysis tool

Totally more than 246 formulas, correlations and methods are implemented from 60 papers and reference books. Complete list of references of books and papers is available here. You can download and install a FREE trial version of NovoSPT with FULL features from here.

Statistical interpretation of correlations for each soil parameter is presented in NovoSPT. This new and exciting feature is necessary for our users to better understand the variation of correlated results when dealing with tens of numbers:

One of the features of NovoSPT is plotting all the results and correlated values for a specific soil parameter in one graph to facilitate comparison and choice of the best estimated value for that parameter. You can even select your favourite correlation methods to be plotted and compared together (see picture on left).

The powerful report builder in NovoSPT summarizes all correlated results in a good-looking, printable report in form of tables and graphs. See the complete list of correlated soil parameters based on Standard Penetration Test (SPT) in NovoSPT software.

The new innovative "Cross Correlation with Depth" feature enables user to plot the variation of a specific soil parameter along depth of borehole, correlated based on some correlation methods to ease comparison of correlated values in depth.